Recommended

Mineral wool Knauf Omnifit Slab 35 50mm (1200x600)

€ 0.00

Required field!
Required field!
Required field!
Required field!

Granular wool Paroc BLT 9, Bydgoszcz, Poland


Mr Marcin's company near Bydgoszcz was commissioned to insulate a large building. All nooks and crannies were filled with blown-in Paroc BLT granulated wool. The granulated wool is dry, does not shrink and does not settle.


Features:

The thermal conductivity coefficient lambda λD is 0.038-0,041 W/mK and the density of this wool is 40-70 kg/m³. Loose granular wool for use on the exterior and interior of buildings for thermal, acoustic and fire insulation.


Usage:

LOFT
Mineral wool for thermal insulation and insulation in usable and non-usable attics and lofts: above the rafters, between the rafters, under the rafters as well as suspended ceilings and knee walls (so-called dry construction).

PARTITION WALLS
Mineral wool for insulation and insulation of walls from the inside, construction of partition walls, pre-walls, partition walls and industrial pre-walls.

FRAME CONSTRUCTIONS, CEILINGS, FLOORS ON JOISTS
Mineral wool for insulation and insulation of: floors on a grid, industrial ceilings, ventilated flat roofs, floors on joists on a wooden or steel structure, suspended ceilings, external and internal walls of frame houses and wooden houses.

THREE-LAYER WALLS
Mineral wool for insulation and insulation of gaps between masonry and prefabricated walls in external and internal walls and basements.

Compare 0 / 3